Antlings FAQ'sUpdated a month ago

How do I power on and off my Antlings?

To power on, press and hold the power button for 3 seconds.

To power off, press and hold the power button for 3 seconds until the Antlings switch off.

How do I pair my Antlings?

The first time you power on your Antlings they will automatically enter pairing mode. The LED indicator flashes red and blue while pairing.

1. Press and hold the power button for 3 seconds to power on and enter pairing mode.
2. On your phone, open Bluetooth settings, then search for and select "BlueAnt Antlings".
3. Once connected, the LED indicator flashes blue.

To go back into pairing mode later: power off the Antlings, then press and hold the power button for 5 seconds. The Antlings will announce "Bluetooth pairing". Now search for and select "BlueAnt Antlings" on the device you want to pair.

What age are the Antlings designed for?

Antlings are designed for children aged 4 to 12 years, with a soft padded headband and plush memory-foam ear cushions sized for smaller heads.

What is in the box?

• 1 x Antlings headphones
• 1 x Boom microphone
• 1 x USB-C to USB-C charge + audio cable
• 1 x Product manual
• 2 x Sticker sheets

PLAY TIME AND CHARGING

What is the play time and charge time of the Antlings?

Antlings give you up to 55 hours of play time on a single charge.

A full charge takes about 2.5 hours.

In a rush? A 10-minute rapid charge gives you up to 5 hours of play time.

Play time and fast-charge figures are measured at 50% volume. Actual play time may vary based on volume, content type and environmental factors.

How do I charge my Antlings?

Use the included USB-C cable and plug the Antlings into a power source — a computer, a USB wall adaptor or a car charger rated at USB 5V 1A output or less.

Only charge the Antlings when the device is clean and dry.

Use only 5V/1A chargers. Non-approved accessories may cause the device to malfunction and will void your warranty.

What do the charging lights mean?

• Flashing red — the battery is low.
• Solid red — the Antlings are charging.
• Light off — the Antlings are fully charged.

How do I know when the battery is running low?

The LED indicator flashes red when the battery is low. Plug the Antlings in with the included USB-C cable to recharge.

EVERYDAY CONTROLS

How do I control music on the Antlings?

• Play or pause — press the power button once.
• Skip forward a track — press and hold the volume up (+) button.
• Skip back a track — press and hold the volume down (−) button.

How do I control volume on the Antlings?

• Press the volume up (+) button once to increase the volume one step.
• Press the volume down (−) button once to decrease the volume one step.

How do I use Siri or Google Assistant on the Antlings?

Press the power button twice to activate Siri, Google Assistant or your device's voice control software.

Are the Antlings foldable?

Yes. Antlings fold down for compact storage, so they fit easily into a school bag or backpack.

SAFE LISTENING

Is the volume limited on the Antlings?

Yes. Everyday use is capped at a maximum of 85dB to protect young ears. The limit is set by the hardware — there is no app and no override.

What is Travel Mode and how do I turn it on?

Travel Mode raises the volume cap to a maximum of 94dB for louder environments, such as a plane or a car.

To activate Travel Mode, press and hold the volume up (+) and volume down (−) buttons together for 3 seconds. 

Antlings default to Everyday mode at power on and limits the volume output to 85dB maximum. 

What are the Antlings made from, and are they safe for children?

Antlings are crafted from upgraded ABS and are free from BPA, PVC, PFAS and phthalates. They have been independently tested and certified by TÜV Rheinland to toy-safety standards AS/NZS ISO 8124.1, EN 71 and ASTM F963, and also carry RoHS, CE/RED and RCM certification.

MICROPHONE AND CALLS

Do the Antlings have a microphone?

Yes. Antlings have a built-in microphone for calls and chatting, plus a supplied detachable boom microphone for clearer voice in noisy environments. Antlings also include Environmental Noise Cancellation (ENC) for enhanced call clarity.

How do I connect the boom microphone?

1. Locate the microphone port — the small circular input jack on the left earcup.
2. Gently align the microphone plug with the port and push it in until it clicks or feels securely connected.
3. Bend the flexible boom arm so the microphone sits near the mouth, about 2 cm away, for optimal voice clarity.
4. The Antlings switch automatically from the internal microphone to the boom microphone when it is plugged in, and back again when you remove it.

How do I control calls on the Antlings?

• Answer an incoming call — press the power button once.
• End a call — press the power button once.
• Reject an incoming call — press and hold the power button for 2 seconds.

SHARING AND CONNECTING

Can two children listen to the same device at once?

Yes. Wireless audio sharing lets you share audio between two pairs of Antlings headphones.

1. Connect the FIRST pair of Antlings to your device.
2. With the SECOND pair powered off, press and hold the power button for 5 seconds until the LED indicator flashes blue and red.
3. On the SECOND pair, press the power button 3 times. The LED indicator will flash blue.
4. On the FIRST pair, press the power button 3 times to share.

Do the Antlings support Multipoint?

Yes. Multi-point connectivity lets the Antlings connect to two devices at the same time, so you can switch easily between them.

1. Pair your first device with the Antlings over Bluetooth. Once connected, turn off Bluetooth on the first device so the Antlings can enter pairing mode again.
2. On your second device, enable Bluetooth and connect to the Antlings.
3. Go back to your first device, turn Bluetooth back on and reconnect to the Antlings. They are now connected to both devices simultaneously.

A call may come through from either device. If it is a call on your phone, you can answer it on the Antlings. If it is a call from your computer, you will need to answer on the computer and it will come through the Antlings.

Which version of Bluetooth do the Antlings use?

Antlings use Bluetooth 6.0 for instant pairing and a reliable signal.

Can I use my Antlings with a computer, laptop or tablet?

Yes, in two ways.

• Over Bluetooth — pair the Antlings with your computer, laptop or tablet the same way you pair a phone. You can keep a phone and a computer connected at the same time using Multipoint (see above).
• Over USB-C — plug the included USB-C cable into your computer, laptop or tablet for wired listening.

WIRED LISTENING

How do I use the Antlings in wired mode?

Antlings are 2-in-1: use them wirelessly, or plug in with the included USB-C to USB-C cable for wired listening.

• If your source device supports USB Audio, the USB-C cable gives you lossless audio playback.
• The play and volume controls work as normal in wired mode.
• The Antlings continue to charge while being used in wired USB mode.
• The Antlings automatically power off when the USB-C cable is unplugged.

TROUBLESHOOTING

How do I factory reset my Antlings?

Before you start, delete the Antlings pairing information from your device.

1. With the Antlings powered off, press and hold the power button for 5 seconds until the LED flashes blue and red.
2. Keep holding the volume up (+) and volume down (−) buttons together for 10 seconds, until the red light flashes 3 times and then goes solid red for 2 seconds.
3. The Antlings will power off automatically. The reset is complete and all pairing information has been removed.

To use them again, pair your device with the Antlings as you did the first time.

How do I clean my Antlings?

A wipe with a dry or slightly damp cloth is enough in most cases. Do not use household or industrial grade detergents or cleaners.

Avoid leaving the Antlings in direct sunlight or anywhere the temperature may exceed 45°C (113°F), such as inside a closed car on a hot day.

PRODUCT AND SUPPORT

Can I buy replacement spare parts?

Yes. We sell the boom microphone and the USB-C charge + audio cable separately. Please visit:

https://blueant.com.au/collections/antlings-spare-parts

What colours do the Antlings come in?

• Black + Green
• Purple + Teal

What warranty do the Antlings come with, and how do I extend it?

Antlings are covered by BlueAnt's limited global warranty for one (1) year from the date of purchase, or if later, the date of delivery. Register your product to extend the warranty from 1 year to 2 years.

Register at register.blueantwireless.com. 

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.

How do I contact BlueAnt for help?

Visit support.blueantwireless.com, email [email protected].