How to turn OFF Soundblade voice promptsUpdated 7 months ago

Issue:

Some users may wish to disable the voice prompts on the Soundblade, including BlueAnt's signature turn-on "didgeridoo" sound. As of firmware version 1.3, the output level of the voice prompts was reduced, and a method to disable the prompts altogether was introduced based on popular customer feedback.

Solution:

You can toggle the voice prompts ON or OFF using the same sequence on the remote control while the Soundblade is in standby mode:

Toggle voice prompts:

• Press Next -> Prev -> Mute in sequence on the remote control.
• When the voice prompts are disabled, the yellow LED will flash quickly twice, and this will also turn off the "didgeridoo" startup sound.
• When the voice prompts are enabled, the green LED will flash quickly twice.

Additional Notes:

• This sequence only works when the Soundblade is in standby mode. Ensure the device is in the correct mode before attempting to toggle the voice prompts.
• How to check your current firmware version.