XT100 / XT120 Soundbar FirmwareUpdated 6 months ago

How to Check Your Current Firmware Version

1. Ensure the soundbar is in standby mode (turned off but connected to power).
2. On the remote control, press the following buttons in sequence:
   NEXT, PREV, Vol-.
3. The current firmware version will display on the LED screen, for example:
   “M 0.14” (indicating firmware version 0.14).

Updating Firmware via USB Stick

Follow these steps to update the firmware on your BlueAnt XT100 / XT120 soundbar using a USB flash drive.

What You Need

• A USB storage device formatted with FAT16 or FAT32.
• The correct firmware file for your soundbar model:
  • TB600D2.ufw for XT100
  • TB602BD.ufw for XT120
• Ensure the firmware file is the only file on the USB drive and placed in the root directory (not inside any folder).

Firmware Update Process

1. Prepare the Soundbar for Update

• Put the soundbar in standby mode (turn it off but keep it connected to power).

2. Insert the USB Drive

• Connect the prepared USB storage device to the USB port on the back of the soundbar.

3. Start the Firmware Upgrade

• On the remote control, press the following buttons in sequence:
  NEXT, PREV, Vol+.

4. Monitor the Update

• The soundbar’s LED display will show the following sequence:
  “USB” → “U ING” → “U OK”.
• Once “U OK” appears, the update is complete.

5. Complete!

• The soundbar will automatically turn off and enter standby mode.
• The white LED indicator will light up, signaling that the soundbar is ready to use.

Important Notes

• Do not turn off the power or remove the USB storage device during the update. Doing so may permanently damage the soundbar.
• The firmware upgrade process takes approximately 15 seconds

How to Verify the Firmware Version

1. Ensure the soundbar is in standby mode (turned off but connected to power).
2. On the remote control, press the following buttons in sequence:
   NEXT, PREV, Vol-.
3. The current firmware version will display on the LED screen, for example:
   “M 0.14” (indicating firmware version 0.14).

Firmware Release Notes

Model: XT100

Model: XT120