Please press and hold the power button until you the LED turns blue, you will also hear the start up sound. This takes about 3 seconds. Please press and hold the power button until you the Zone X says "Powering down". This takes about 3 seconds. A fu

<h3 id="isPasted">How do I power on the Zone X?</h3><p>Please press and hold the power button until you the LED turns blue, you will also hear the start up sound. This takes about 3 seconds.</p><h3 id="how-do-i-power-off-the-zone-x">How do I power off the Zone X?</h3><p>Please press and hold the power button until you the Zone X says &quot;Powering down&quot;. This takes about 3 seconds.</p><h3 id="how-do-i-pair-my-zone-x">How do I pair my Zone X?</h3><ul><li>Press and hold the Bluetooth button for about 3 seconds, until the light starts flashing blue/red. This is pairing mode.</li><li>Search for devices on your phone</li><li>Select &#x2018;BlueAnt ZoneX&#x2019;</li></ul><h3 id="what-is-the-play-time-and-charge-time-of-the-zone-x">What is the play time and charge time of the Zone X?</h3><p>A full charge of the Zone X will take about 3 hours.</p><p>The play time for the Zone X is 35 hours* in Bluetooth mode with ANC disabled.</p><p>With ANC or Transparency enabled play time is 24 hours*.</p><p>A 15 minute rapid charge with give you 3 hours* play time.</p><p>These play times are measured at full volume.</p><p>*Play time may vary based on type of music and environmental factors.</p><h3 id="how-do-i-activate-active-noise-cancelling-on-the-zone-x">How do I activate Active Noise Cancelling on the Zone X?</h3><p>When you power on the Zone X active noise cancelling is enabled by default.</p><p>If you have turned off noise cancelling you can reactivate it by pressing the ANC button until the Zone X says &quot;Noise Cancelling&quot;.</p><p>The LED is green when noise cancelling is active.</p><h3 id="how-do-i-activate-advanced-transparency-mode-on-the-zone-x">How do I activate Advanced Transparency Mode on the Zone X?</h3><p>When in active noise cancelling mode and you want to activate advanced transparency mode please press the ANC button and the Zone X will say &quot;Transparency&quot;.</p><p>Advanced transparency mode stops noise cancelling and amplifies the ambient sounds of the world around you.</p><h3 id="how-do-i-deactivate-active-noise-cancelling-and-advanced-transparency-mode-on-the-zone-x">How do I deactivate Active Noise Cancelling and Advanced Transparency Mode on the Zone X?</h3><p>Press the ANC button and the Zone X will say &quot;Transparency and Noise Cancelling off&quot;.</p><p>This will disable active noise cancelling and advanced transparency mode.&#xA0;</p><p>To re-enabled active noise cancelling press the ANC button again and the Zone X will say &quot;Noise Cancelling&quot;.</p><h3 id="how-do-i-use-instant-awareness-mode-on-the-zone-x">How do I use Instant Awareness Mode on the Zone X?</h3><p>Place you right hand over the right ear cup and the music will be instantly muted so you can hear outside noise&#xA0;or listen to an announcement.</p><p>Remove you hand to instantly un-mute the music.</p><h3 id="how-do-i-control-music-on-the-zone-x">How do I control music on the Zone X?</h3><p>To play or pause music simply double tap the middle of the flat area of the right ear cup.<br><br>To skip forward a track simply slide your finger from the back to the front of the flat area.</p><p>To skip backward a track simply your finger from the front the back of the flat area.</p><p>To increase volume slide your finger from the bottom to the top of the flat area.</p><p>To decrease volume slide your finger from the top to the bottom of the flat area.</p><h3 id="how-do-i-control-calls-on-the-zone-x">How do I control calls on the Zone X?</h3><p>To answer an incoming call simply double tap the flat area of the right ear cup.</p><p>To end a call simply double tap the flat area on the right ear cup.</p><p>To reject an incoming call simply single tap and hold the middle of the flat area of the right ear cup.</p><p>If music was playing prior to the call it will resume after the call is finished.</p><h3 id="how-do-i-use-sirigoogle-on-the-zone-x">How do I use Siri/Google on the Zone X?</h3><p>To start Siri/Google simply single tap and hold the middle of the flat area of the right ear cup.</p><p>To cancel Siri/Google simply single tap and hold the middle of the flat area of the right ear cup.<br><br>If music was playing prior to invoking Siri/Google it will resume afterwards.</p><h3 id="how-do-i-reset-my-zone-x">How do I reset my Zone X?</h3><p>Please press and hold the Bluetooth button until the ZoneX says &quot;Factory Reset Complete&quot;. This takes about 8 seconds.<br>Then power off the Zone X.<br>When you next power on the Zone X it will go into pairing mode.</p><h3 id="can-i-clean-my-earcups">Can I clean my earcups?</h3><p>Yes please use a damp non-alcohol based wipe and gently wipe over, please allow to air dry.</p><h3 id="can-i-purchase-ear-cups-separately">Can I purchase ear cups separately?</h3><p>No, the Zone X ear cups are not removeable.</p><h3 id="whats-in-the-box">What&apos;s in the box?</h3><ul><li>Zone X Premium ANC headphones</li><li>Deluxe low profile Carry Case</li><li>USB-C charge cable</li><li>AUX cable</li><li>Airplane adaptor</li><li>Manual</li></ul><h3 id="can-i-use-my-zone-x-with-my-computer-laptop-or-tablet">Can I use my Zone X with my computer, laptop or tablet?</h3><p>To use the Zone X via Bluetooth with your computer/laptop/tablet your device must support A2DP for music playback.</p><p>To use the microphone on the Zone X your computer/laptop/tablet must support HFP or HSP. To check what is supported on your computer please check with your computer/laptop/tablet manufacturer.</p><p><strong>To connect to your Computer/Laptop/Tablet:</strong></p><ul><li>Please disable Bluetooth on your phone.</li><li>Then power on the Zone X by holding the Bluetooth button and keep holding the button for about 3 seconds until the light starts flashing blue/red rapidly, this is pairing mode.</li><li>Then on the computer/laptop/tablet add a Bluetooth device and select the Zone X.</li><li>Once the ZoneX is connected you can re-enable Bluetooth on your phone.</li><li>To switch back to phone use please disable Bluetooth on your computer/laptop/tablet and select the ZoneX on your phone.</li><li>Once the ZoneX is connected to your phone you can re-enable Bluetooth on your computer/laptop/tablet.</li></ul><p>When using your Zone X via AUX cable only audio playback is supported, not the microphone.</p><p>Control of the music is done on your computer/laptop/tablet when using AUX.</p><p>Volume on the speaker only controls the speaker and not the source volume.</p>

Zone X FAQ's

Yes please remove ear cups from device & use a damp non-alcohol based wipe and gently wipe over, please allow to air dry, then click back into place. Yes these can be purchased separately – please visithttps://blueant.com.au/collections/pump-zone-acc

<h3 id="isPasted">How do I pair my Pump Zone&#x2019;s?</h3><ul><li>Make sure you Pump Zone&#x2019;s are turned off</li><li>Press and hold the Play/Pause button for 5 seconds</li><li>Search for devices on your phone</li><li>Select &#x2018;BlueAnt Pump Zone&#x2019;</li></ul><h3 id="can-i-clean-my-earcups">Can I clean my earcups?</h3><p>Yes please remove ear cups from device &amp; use a damp non-alcohol based wipe and gently wipe over, please allow to air dry, then click back into place.</p><h3 id="can-i-purchase-ear-cups-separately">Can I purchase ear cups separately?</h3><p>Yes these can be purchased separately &#x2013; please visit<br><br><a data-sanitized-target="_blank" href="https://blueant.com.au/collections/pump-zone-accessories" rel="noopener noreferrer" title="https://blueant.com.au/collections/pump-zone-accessories">https://blueant.com.au/collections/pump-zone-accessories</a></p><p>All Pump Zone headphones have the same size ear cups.</p><h3 id="can-i-use-my-pump-zone-with-my-computer-laptop-or-tablet">Can I use my Pump Zone with my computer, laptop or tablet?</h3><p>To use the Zone via Bluetooth with your computer/laptop/tablet your device must support A2DP for music playback.</p><p>To use the microphone on the Zone your computer/laptop/tablet must support HFP or HSP. To check what is supported on your computer please check with your computer/laptop/tablet manufacturer.</p><p><strong>To connect to your Computer/Laptop/Tablet:</strong></p><ul><li>Please disable Bluetooth on your phone.</li><li>Then power on the Pump Zone by holding the play button and keep holding the button until the light starts flashing blue rapidly, this is pairing mode.</li><li>Then on the computer/laptop/tablet add a Bluetooth device and select the Zone.</li><li>Once the Zone is connected you can re-enable Bluetooth on your phone.</li><li>To switch back to phone use please disable Bluetooth on your computer/laptop/tablet and select the Zone on your phone.</li><li>Once the Zone is connected to your phone you can re-enable Bluetooth on your computer/laptop/tablet.</li></ul><p>When using your Zone via AUX cable only audio playback is supported, not the microphone.</p><p>Control of the music is done on your computer/laptop/tablet when using AUX.</p><p>Volume on the speaker only controls the speaker and not the source volume.</p>

Pump Zone FAQ's

Yes please remove ear cups from device & use a damp non-alcohol based wipe and gently wipe over, please allow to air dry, then click back into place. Yes these can be purchased separately - please visit. https://blueant.com.au/collections/pump-soul-a

<h3 id="isPasted">How do I pair my Pump Soul&#x2019;s?</h3><ul><li>Make sure you Pump Soul&#x2019;s are turned off</li><li>Press and hold the Play/Pause button for 5 seconds</li><li>Search for devices on your phone</li><li>Select &#x2018;BlueAnt Pump Soul&#x2019;</li></ul><h3 id="can-i-clean-my-earcups">Can I clean my earcups?</h3><p>Yes please remove ear cups from device &amp; use a damp non-alcohol based wipe and gently wipe over, please allow to air dry, then click back into place.</p><h3 id="can-i-purchase-ear-cups-separately">Can I purchase ear cups separately?</h3><p>Yes these can be purchased separately - please visit</p><p><a data-sanitized-target="_blank" href="https://blueant.com.au/collections/pump-soul-accessories" rel="noopener noreferrer" title="https://blueant.com.au/collections/pump-soul-accessories">https://blueant.com.au/collections/pump-soul-accessories</a></p><h3 id="can-i-use-my-pump-soul-with-my-computer-laptop-or-tablet">Can I use my Pump Soul with my computer, laptop or tablet?</h3><p>To use the Soul via Bluetooth with your computer/laptop/tablet your device must support A2DP for music playback.</p><p>To use the microphone on the Soul your computer/laptop/tablet must support HFP or HSP.</p><p>To check what is supported on your computer please check with your computer/laptop/tablet manufacturer.</p><p><strong>To connect to your Computer/Laptop/Tablet</strong></p><ul><li>Please disable Bluetooth on your phone.</li><li>Then power on the Pump Soul by holding the play button and keep holding the button until the light starts flashing blue rapidly, this is pairing mode.</li><li>Then on the computer/laptop/tablet add a Bluetooth device and select the Soul.</li><li>Once the Soul is connected you can re-enable Bluetooth on your phone.</li><li>To switch back to phone use please disable Bluetooth on your computer/laptop/tablet and select the Soul on your phone.</li><li>Once the Soul is connected to your phone you can re-enable Bluetooth on your computer/laptop/tablet.</li></ul><p>When using your Soul via AUX cable only audio playback is supported, not the microphone.</p><p>Control of the music is done on your computer/laptop/tablet when using AUX.</p><p>Volume on the speaker only controls the speaker and not the source volume.</p>

Pump Soul FAQ's

Can't find what you're looking for in the articles above? Feel free to reach out.

TikTok

YouTube

BlueAnt

These articles relate to older products that are no longer in production but may still be in use by customers.

Previous Range

FAQ's

Headphones

Register your BlueAnt product

Product Registration

Talk X FAQ's

Zone 2 FAQ's

Pump X FAQ's

Current Range

X0i FAQ's

X1i FAQ's

X2i FAQ's

X3i FAQ's

X3D MAX FAQ's

X3D FAQ's

X4 FAQ's

X4i FAQ's

X5i FAQ's

X6 FAQ's

X3 FAQ's

X5 FAQ's

Burleigh FAQ's

X0 FAQ's

X1 FAQ's

X2 FAQ's

Speakers

Pump Air Nano FAQ's

Pump Air Micro FAQ's

Pump Air Lite 2 FAQ's

Pump Air Lite 3 FAQ's

Pump Air ANC 2 FAQ's

Pump Air X2 FAQ's

Pump Air X3 FAQ's

Pump Air Epic FAQ's

Open X FAQ's

Pump Air Ultra FAQ's

Pump Air Lite FAQ's

Pump Air ANC FAQ's

Pump Air X FAQ's

Pump Air Pro FAQ's

Pump Air FAQ's

Pump Air 2 FAQ's

Earbuds

XT100 FAQ's

XT120 FAQ's

Soundblade Audio and Sound Quality

Soundblade Connectivity

Soundblade Features and Functionality

General Product Information

Safety and Maintenance

Sustainability

Design and Innovation

Soundblade FAQ's

Soundbars

Stream X FAQ's

Microphones

Commute 3 FAQ's

Legacy Products

Pump X Docs

Zone 2 Docs

Talk X Docs

Zone X Docs

Pump Zone Docs

Pump Soul Docs

X0i Docs

X1i Docs

X2i Docs

X3i Docs

X3D Docs

X3D MAX Docs

X4 Docs

X4i Docs

X5 Docs

X5i Docs

X6 Docs

X0 Docs

X1 Docs

X2 Docs

X3 Docs

BURLEIGH Docs

Pump Air Nano Docs

Pump Air Micro Docs

Pump Air Lite 2 Docs

Pump Air Lite 3 Docs

Pump Air ANC Docs

Pump Air ANC 2 Docs

Pump Air X2 Docs

Pump Air X3 Docs

Pump Air Ultra Docs

Open X Docs

Pump Air Pro Docs

Pump Air Epic Docs

Pump Air Lite Docs

Pump Air Docs

Pump Air 2 Docs

Pump Air X Docs

XT100 Docs

XT120 Docs

Soundblade Docs

Stream X Docs

Mic-X Wireless Microphone

Commute3 Docs

Other

Product Documents

Only one of my buds is working

One earbud is louder than the other

One or both earbuds seem to have lost volume

What's this about an MFB? I can't find a button on my earbuds!

Only one of my buds seems to be charging

Pump Air - Re-Sync Instructions

Pump Air 2 - Re-Sync Instructions

Pump Air ANC - Re-Sync Instructions

Pump Air Epic - Re-Sync Instructions

Pump Air Lite - Re-Sync Instructions

Pump Air Lite2 - Re-Sync Instructions

Pump Air Nano - Re-Sync Instructions

Pump Air Pro - Re-Sync Instructions

Pump Air Ultra - Re-Sync Instructions

Pump Air X - Re-Sync Instructions

Pump Air X2 - Re-Sync Instructions

Pump Air ANC2 - Re-Sync Instructions

Buds lost connection to each other?

Troubleshooting Earbuds

No audio output from the Soundblade

Soundblade USB connectivity issues

Soundblade - I can see two Bluetooth devices, which one do I connect to?

Do I need an app to connect to the Soundblade via BT?

Soundblade voice prompts are too LOUD!

How to turn OFF Soundblade voice prompts

Soundblade volume too LOUD on lowest volume setting

Soundblade - Low volume or varying volume across applications

Soundblade stays ON, even when I turn OFF my PC

Soundblade Troubleshooting

Troubleshooting Soundbars

Troubleshooting

XT100 / XT120 Soundbar Firmware

X5i Firmware

Soundblade - How to check your current firmware version

Soundblade - How to update your firmware

Soundblade - Firmware Release Notes

Soundblade Firmware

Firmware Updates & Apps

BlueAnt Standard Warranty

Returns

Warranty & Returns